Laticrete - HYDRO BAN Waterproofing Adhesive & Sealant

SKU: 9099-0601-2

$19.99 USD

~~$21.39 USD~~ $19.99 USD

Sale Coming Soon

Shipping calculated at checkout.

Size 10.3oz Tube 20oz Sausage

Highlights & Benefits

Flood Testing
Allow for flood testing in 2 hours at 70°F (21°C) and 50% RH or higher before flood testing. Cold and /or dry conditions will require a longer curing time.

Time to Tile
Tile application can occur after the HYDRO BAN® Adhesive & Sealant is tack dry, usually 40 minutes depending on temperature and relative humidity.

Shipping & Fulfillment

Typically ships within 1-12 business days depending on availability.

View full details

Product Details

Laticrete HYDRO BAN Adhesive & Sealant is a one-component, fast-curing, hybrid elastomeric adhesive and sealant formulated to meet Green Building Standards. It offers excellent adhesion on a wide variety of substrates, including polystyrene, and is ideal for use with LATICRETE products such as the HYDRO BAN Pre-Sloped Shower Pan, Preformed Seat, Board, Preformed Niche, Pre-Sloped Ramp, Preformed Curb, and Preformed Curb Overlay.

Physical Properties

Service Temperature Range: 32°F (0°C) to 120°F (49°C)
Application Temperature Range: 35°F - 80°F (2°C - 27°C)
Open Time: 20–30 minutes
Set Time: 2 hours
Full Cure: 40 hours
Clean Up: Soapy water
Mildew Resistance: Good
Consistency: Non-sag
VOC: 18g/L

Advantages

Excellent adhesion on nearly ALL substrates including polystyrene
Fast cure
Excellent durability
Superior flexibility
Will NOT shrink or crack
Low VOC
Contains no isocyanates
Allow for flood testing in 2 hours at 70°F (21°C) or higher and 50% RH

Suitable Substrates

Exposed Aggregate Concrete
Extruded Polystyrene
Cement Backer Board
Polystyrene Backer Board

Approximate Coverage

Coverage will vary depending upon joint size and width.
Approximately 25 lineal feet (7.62 m) per tube at 1/4" x 1/4" (6 x 6 mm) joint width
Approximately 49 lineal feet (14.9 m) per sausage pack at ¼” x ¼” (6x6 mm) joint width.