Laticrete - Prime-N-Bond Primer - Multi-Purpose Bonding Primer

SKU: 0095-0035-2

$194.99 USD

~~$242.90 USD~~ $194.99 USD

Sale Coming Soon

Shipping calculated at checkout.

Size 3.5 Gallon 1 Gallon

Highlights & Benefits

Multi-purpose and can be used on a wide range of substrates
One component, ready to use, no mixing required
Single coat application
Apply with roller or brush
Low VOC, low odor, ideal for interior and occupied areas
Formulated with aggregate for an enhanced mechanical bond of mortars to a variety of smooth or low-absorptive substrates
Improves bonding of cement self-leveling products. Refer to self-leveling product data sheet and TDS230N for list of suitable substrates, surface preparation, and priming instructions.
White color will not darken the back of light colored stone
Resin-backed tile and stone can be primed with PRIME-N-BOND for interior residential and light commercial applications in accordance with ASTM C627.

Shipping & Fulfillment

Typically ships within 1-12 business days depending on availability

View full details

Product Details

LATICRETE Prime-N-Bond is a versatile, high-performance bonding primer designed to improve adhesion for a wide range of surface preparation applications. This easy-to-use, multi-purpose primer enhances the bond between substrates and subsequent materials, making it an ideal choice for both commercial and residential projects. Available in two convenient sizes - 1-gallon (3.78 L) pail and 3.5-gallon (13.3 L) plastic pail - Prime-N-Bond provides the flexibility and efficiency needed for any scale of project.

Suitable Substrates (Interior Only)

• Glass Tile
• Quarry Tile
• Cement Terrazzo
• Cement-Based Agglomerates
• Glazed Cement Masonry Units
• Floor Covering Adhesive Residue
• Polyurethane Floor Covering Adhesive Residue
• Ceramic Tile with Glazed or Smooth Surfaces
• Well-Bonded Cutback Adhesive
• Natural Stone
• Vinyl Flooring
• VCT
• Plastic Laminate Countertops
• Agglomerate Marble
• Ceramic Tile
• Concrete Smooth and Non Absorbent
• Dry Shake Hardener
• Epoxy Coating
• Moisture Barrier (Sheet Goods)
• Radiant Heated Floors
• Rigid Fiberglass Panels
• Epoxy Terrazzo
• Poured Gypsum Underlayment (Interior dry areas only. Refer to LATICRETE TDS 148, Bonding Ceramic Tile or Stone Over Poured Gypsum Underlayments, for further information.)
• Resin-Backed Tile and Stone (Refer to LATICRETE TDS 150 , Installation of Resin-Backed Tile and Stone, for further information.)
• Oriented Strand Board (OSB)
• Exterior Glue Plywood
• Porcelain tile

Advantages

• Multi-purpose and can be used on a wide range of substrates
• One component, ready to use, no mixing required
• Single coat application
• Apply with roller or brush
• Formulated with aggregate for an enhanced mechanical bond of mortars to a variety of smooth or low-absorptive substrates
• Improves bonding of cement self-leveling products. Refer to self-leveling product data sheet and TDS230N for list of suitable substrates, surface preparation, and priming instructions.

Approximate Coverage

1 Gal pail: 150-300 sq/ft
3.5 Gal pail: 525-1050 sq/ft

Drying Time

Allow PRIME-N-BOND to dry before applying a polymer modified mortar. The minimum drying time is 15 – 60 minutes depending on the substrate and environmental conditions. When used as primer for self-leveling products (e.g. NXT LEVEL) allow 2 – 5 hours for PRIME-N-BOND to dry before self-leveling products are poured.
If PRIME-N-BOND dries for more than 72 hours before application of the self-leveling cement, clean the surface, re-apply an additional coat of PRIME-N-BOND and install the self-leveling products within 72 hours. Mix and install self-leveling products per LATICRETE product data sheet and installation instructions.

VOC/LEED Product Information

VOC: 0.9 gm/l