RUBI diamond rubber pads can be used dry but wet use is also recommended, either by moistening the plug or providing a source of continuous cooling. The range of RUBI diamond rubber polishing blocks comes in different granulometry to perform different polishing and finishing tasks. It is very important that in the polishing work a stepwise degradation is carried out using the different grains successively, starting with the largest grain to the smallest.
Pads are designed to work on areas that power tools can't access such as interior angles, hollow areas of corners and for roughing and smoothing chipped or sharp edges
60, 120 and 200 grit pads are for roughing the material
400 grit pads are for polishing the material
Grip area has an ergonomic lateral groove for reducing hand fatigue during use
Wet use is recommended, either by moistening the pad or providing a continuing cooling source
Can be used dry
Polishing work must be a stepwise degradation using the different grains successively, starting with the largest grain to the smallest
Movement of the block must go, always, from the top (most visible) to the bottom reducing the risk of chipping or material damage
